1. Honda Pilot
  2. Owner info
  3. Oil Capacity
  4. 2014

2014 Honda Pilot Oil Capacity

The 2014 Honda Pilot with the J35Z4 engine takes 4.2 qt of oil, with 0W-20 as the listed oil grade. These figures are specific to the engine shown in the Facts, so use them as a reference for that configuration rather than assuming they apply to every Pilot.

Read the capacity as the stated oil amount and the grade as the listed oil specification. The Facts provide one engine and one set of figures, with no differences by trim or another engine noted. If your vehicle’s engine or configuration is not confirmed, check the door jamb or the owner’s manual; confirm the required oil capacity and grade there before servicing.

The listed capacity may depend on the service procedure, such as whether the oil filter is replaced. No separate capacity by service type is provided here, so confirm the exact amount for your vehicle in the owner’s manual.

4.2 qt · 0W-20 (J35Z4)

Catalog dataManufacturer figures stored on configuration rows

  • 4.2 qt · 0W-20 · J35Z4

Questions

Does oil capacity vary by engine?
Stored oil capacity is the same across engine groups in this extract.
How much oil is stored for each engine?
J35Z4: 4.2 qt

Catalog oil filters

Catalog year/make/model rows for 2014 Honda Pilot.

Viscosity and filter part numbers appear only when the catalog stores them. This is not an oil-change procedure.

Catalog fitment does not by itself prove OEM-equivalent compatibility.